Restore clear, like-new headlights with this at-home renewal kit.
- Step-by-step you can follow: clean the headlight with a cloth, mask surrounding areas, then wet-sand with progressively finer grits (e.g., P180, then P240), switching directions each pass to avoid edge damage.
- Surface treatment uses a vaporizing cup: pour 60–80 ml of repair solution, power up and wait ~3 minutes for steam, then hold the cup ~1 cm from the surface and move evenly; deeper scratches may need a bit longer; after you finish, turn off power and return any leftover liquid to the bottle.
- Safety and use tips: Do not turn on the device when you are not using it, and do not exceed 5 minutes per session to avoid overheating; avoid windy conditions; if liquid drips, do not invert the gas tube and re-treat the affected area.
- Results and storage: The surface should become uniformly smooth, white, and free from sanding marks; ensure uniform sanding across the entire area for best results; any excess liquid can be stored for future touch-ups.
